X-flow 3.0dt1/1000 plus
Calpak X flow is a very high performance domestic hot water transit tank. It is connected to any available energy source (heat pump, gas or oil boiler, solar panels, electric resistance) storing energy with which it immediately heats the running water to the desired temperature, through a new technology speed-exchanger. In addition, it can be used as an inertia vessel for space heating.
Features
Ιdeal for medium capacity hotels (50-100 guests)
Hot water supply @ ΔΤ1: 3,000 liters / hour
Hot water supply @ ΔΤ5: 4,000 liters / hour
Counter-flow kit with circulator and CFA/3 controller: YES
Buffer tank capacity: 1,000 lt
Insulation Thickness: 100mm
Thermal Losses: 2.1 kwh/24h
Connection with Heat Pump: YES
Connection with Boiler (gas or oil): YES
Connection with Solar collectors: YES (model “plus”)
Recommended Heating element: 6ΚW
Total efficiency of the tank (charge & discharge): 99%
Energy Savings: >25%
Pure water without bacteria: 100%
Description
Endless Hot Water
Continuous and uninterrupted supply of hot water for use, at the desired temperature, up to 6,000 liters/hour per container!
Fresh and Clean
The water used is not stored. instantly heated by the pass-through exchanger so it stays fresh and clean, bacteria free!
Minimum Energy Consumption
Thanks to the excellent efficiency of the bypass exchanger (99%) the charging of the inertial tank can be done even just 1 degree more than the desired domestic hot water temperature!
10 Year Factory Guarantee
Since the water used is not stored, the X-flow does not corrode, as a result of which the expectation of its good operation is very high even in the most difficult conditions!